Customizable 3D Print Designs

Find a starting point for your next print. Copy a community design to your library, then adjust its dimensions with sliders or ask AI to help you make it your own.

Export your saved version as STL or 3MF for your slicer, or download the editable OpenSCAD code. Check the fit, orientation, and print settings before printing. See how Extrudely works.

Community designs

16 designs
Recently updated
Twin-Fin Fighter-Style Glider With Swept Wings

This customizable fighter-style glider features swept, tapered main wings, a raised cockpit canopy, a narrow forward fuselage, and twin vertical tail fins. The front end has no separate nose pod or ballast pocket. Its wing geometry combines a flat underside with an adjustable raised upper profile, while the horizontal tail includes a trailing-edge trim ramp. Edit the OpenSCAD parameters to change wingspan, wing position, root and tip chords, sweep, surface thickness, fuselage proportions, canopy height, tail geometry, and fin spacing. A recessed balance reference is adjustable as a percentage of mean aerodynamic chord; it is a geometric starting target, not a measured center of gravity. Available formats are STL, 3MF, and OpenSCAD.

Log in to copy
Split Stackable Desktop Paper Tray with Accessory Divider Option

Organize desktop papers or small accessories with a rectangular tray featuring a low front lip, raised side and rear walls, and corner locating tabs with underside sockets for stacking. The design splits into front and rear halves with dovetail joints along the floor seam. Choose an open paper tray or an accessory version with two crosswise dividers forming three compartments. Editable parameters cover overall width and length, wall and floor thickness, wall and front lip height, corner posts, stacking tabs and socket clearances, divider dimensions, and dovetail count, size, and clearance. Select either half individually or view the assembled model. Available formats: STL, 3MF, and editable OpenSCAD source.

Log in to copy
Vertical Laptop Stand with Laravel Engraving

A customizable vertical laptop stand with a rectangular base, sloped supports, a beveled central channel, and recessed Laravel lettering on one outer face. Created for a 16-inch MacBook Pro desk-storage use case, the default model measures 180 × 124 × 46 mm with a 17 mm clear channel; check your laptop’s thickness before choosing the slot width. The OpenSCAD source includes self-contained vector lettering, so no external font is required. Editable parameters cover overall dimensions, base thickness, channel width, support and shoulder offsets, bevel sizes, and the lettering’s width, depth, and vertical position. The default inscription is 70 mm wide and engraved 0.6 mm deep. Available formats are STL, 3MF, and OpenSCAD.

Log in to copy
Adjustable Desk-Edge Cable Holder with Five Side-Entry Pockets

Organize cables along a desk edge with this single-piece, slide-on U-shaped holder. The default design has a 25 mm desk opening and five 4 mm cable pockets on an exterior rail. Rounded side entries are narrower than the pockets, allowing cables to be inserted from the edge while remaining accessible from above when installed. The parametric OpenSCAD source lets you adjust desk thickness, fit clearance, clip depth, cable diameter, pocket count, spacing, wall thickness, entry width, and corner radius. The source limits entry width relative to pocket diameter and checks for spacing between pockets. The model is oriented on one end for printing. Desk fit and cable retention should be checked with a test print, particularly with the default zero added clearance. Available formats: STL, 3MF, and OpenSCAD.

Log in to copy
Rounded-Corner Drawer Organizer Tray with Adjustable Compartment Grid

Organize small items with an open-top rectangular drawer tray featuring a flat bottom, rounded outside corners, and integrated grid dividers. The default design measures 180 × 120 × 35 mm overall, including the walls, with six compartments arranged in three columns and two rows. Floor, wall, and divider thicknesses default to 2 mm. The editable OpenSCAD source provides controls for length, width, height, all three thicknesses, row and column counts, and corner radius. Built-in limits reduce the compartment count when needed to preserve usable cell space as dimensions change. The floor, walls, and dividers form a single connected design. Available formats: STL, 3MF, and OpenSCAD.

Log in to copy
Parametric Male-to-Male Vacuum Hose Reducer with Fit-Test Rings

A hollow vacuum hose adapter with two male insertion ends, a tapered transition, and a continuous bore without internal steps. The default setup uses measured socket inside diameters of 32 mm and 35 mm, with 0.3 mm diametral clearance, giving male outside diameters of 31.7 mm and 34.7 mm. Each insertion section is 25 mm long, joined by a 20 mm transition with 2 mm walls and external lead-in chamfers. The OpenSCAD source lets you edit both socket diameters, clearance, insertion lengths, taper length, wall thickness, and chamfer size. Positive clearance makes each male end smaller than its mating socket. An optional mode generates two short fit-test rings with adjustable length and spacing. Available formats: OpenSCAD, STL, and 3MF.

Log in to copy
Rounded-Front Pegboard Storage Cup with Adjustable SKÅDIS-Style Mounts

Organize small items with this parametric open-top storage cup, featuring rounded front corners, a flat back, two integral mounting hooks, and lower board standoffs. The default cup measures 80 × 50 × 70 mm externally, with 2.4 mm walls and a 3 mm floor. Edit the OpenSCAD parameters to change width, depth, height, wall and floor thickness, and corner radius. Separate mounting controls adjust clearance, slot dimensions, hook spacing, board thickness, hook geometry, and standoffs without tying them to the cup size. A switch generates a small mounting fit-test piece instead of the full cup. Intended for an IKEA SKÅDIS pegboard setup; verify slot width, slot height, spacing, and board thickness before relying on the fit. Available in STL, 3MF, and OpenSCAD formats.

Log in to copy
AA and AAA Desktop Battery Organizer with Fresh and Used Sections

Keep upright batteries sorted in a rectangular desktop organizer with separate FRESH and USED sections. The default layout provides 24 blind pockets: six AA and six AAA in each section. Rounded outside corners, chamfered pocket entrances, a flat bottom, and recessed size labels complete the design. The editable OpenSCAD source calculates the footprint from your layout. Adjust battery diameters, clearance, pocket depths, row and column counts, wall and floor thicknesses, spacing, corner radius, chamfers, and label settings. Built-in geometric lettering requires no external fonts. A two-pocket fit-sample mode generates one AA pocket and one AAA pocket; increase diametral clearance for a looser fit or decrease it for a tighter fit. Available formats: STL, 3MF, and OpenSCAD.

Log in to copy
iMac Drawer Stand

iMac Drawer Stand

By Landon Ringeisen

Maximize every inch of your desk ecosystem with this custom-engineered organizer that mounts directly into the neck space between your iMac stand and display. Designed to seamlessly integrate with your hardware, it adds three convenient storage drawers for small accessories and a built-in front iPhone holder to keep your device upright and in view—turning dead space into your desk's most productive zone.

Log in to copy
Tea Bag Organizer with Recessed Ratchet Pusher and Slotted Lid

This customizable tea bag organizer features a long, covered tray with a movable follower and a thumb tab extending through the lid slot. The floor keeps joint features beneath its surface, with ratchet teeth recessed into two narrow channels rather than raised above the floor. The lid has no decorative windows, retaining only the handle slot and front access opening. The design comprises two tray sections, two lid sections, and a separate follower, with snap joints and alignment tabs at the section seams. Editable parameters include tray dimensions, wall and floor thickness, corner radius, front tilt, access openings, lid fit, joint clearances, follower geometry, and ratchet details. Assembly and individual-part views are selectable. Available formats: STL, 3MF, and OpenSCAD.

Log in to copy
Stackable Filament Spool Bay to organize your filament

Organize upright filament spools with a customizable storage bay featuring an open rail floor, four stacking posts, and thin X-shaped side braces. Front and rear retaining lips border the compartment, while tapered locating pegs and underside sockets provide alignment between stacked bays. The frame replaces solid floor and side panels with narrow structural elements to reduce modeled volume. Editable parameters include compartment width, depth, tier height, rail and post sizes, brace dimensions, retaining lips, and peg size, position, and clearance. Adjust the OpenSCAD source to suit your storage layout, and check filament usage in your slicer before printing; a per-bay weight has not been verified. Available formats: STL, 3MF, and OpenSCAD.

Log in to copy
Three-Key MX Clicker with Deep Recessed Base

A customizable three-key desktop clicker with a rounded rectangular base, deep stepped key wells, and tapered Esc, F1, and F2 keycaps. The raised walls surround more of each keycap for a less exposed appearance. The design uses separately purchased MX-compatible clicky switches for its mechanism; switches are not modeled. Editable parameters control base dimensions, recess depth and width, key spacing, mounting openings and fitting allowance, keycap shape, cross-shaped stem sockets, and legend size and engraving depth. Set engraving depth to zero for blank caps. Component selection provides the full part layout, individual base or keycaps, and an assembled preview. Built-in vector legends require no external fonts. Available formats are STL, 3MF, and OpenSCAD.

Log in to copy
Floating-Disc Dog Water Bowl with Bone-Shaped Drinking Opening

This customizable three-piece dog water bowl design combines a flared-base bowl, a floating-disc insert with a recessed bone-shaped drinking opening, and a retaining ring with six clip arms. The OpenSCAD source provides separate part selection and an assembly preview. Editable parameters cover bowl diameter and height, wall and floor thickness, base flare, disc clearance and thickness, drinking recess dimensions, bone-opening proportions, and retaining-ring clip geometry. Chamber width and skin thickness controls define the disc’s enclosed air-chamber geometry. The floating-disc concept depends on watertight construction; the preview position is illustrative rather than a verified water level. Available formats are STL, 3MF, and OpenSCAD.

Log in to copy
Print-in-Place Fishing Hook Box with Captive Hinge and Snap Latch

Keep fishing hooks and small tackle together in a rounded storage box with a single, undivided compartment. This parametric design features an attached lid, a print-in-place captive-axle hinge, and an external snap latch designed to release by pulling the tab outward. The hinge geometry incorporates its own axle rather than a separate hinge pin. Customize the box length, width, body height, lid depth, wall thickness, and corner radius in the OpenSCAD source. Hinge size, axle diameter, moving clearances, and latch geometry are also editable for fit adjustments. The model is supplied in an open configuration, with STL, 3MF, and OpenSCAD formats available.

Log in to copy
Desktop Phone Stand with Charging Gap and Short Pedestal Supports

This customizable desktop phone cradle pairs a rearward-leaning backrest with short, tapered under-seat pedestals rather than tall rear braces. The split ledge includes front retention lips and a central charging-cable gap, while an open-front channel runs through the rounded base. A rectangular backrest opening provides relief for a raised case mount. The default design has a 100 × 96 mm base and a 15° rearward lean. The editable OpenSCAD source lets you adjust base size and corner radius, backrest dimensions, seat height and position, lean angle, case clearance, lip height, charging gap, mount-relief opening, cable-channel width, wall thickness, and pedestal thickness. Available formats are STL, 3MF, and OpenSCAD.

Log in to copy