Made to your measurements

Custom hose adapter generator

Connect different hose or fitting sizes with a straight, adjustable adapter. Enter the actual measurements, choose how each end fits, and open the model in your design studio.

Set your dimensions

All dimensions are in millimeters. Each straight connection uses one quarter of the overall length; the middle half joins the two sizes.

Measure the outside diameter of the hose or fitting.

Measure the outside diameter of the hose or fitting.

Clearance changes the diameter, not the radius: a 32 mm connection with 0.4 mm clearance gets a 32.4 mm socket bore, or a 31.6 mm spigot outside diameter.

The preview needs no account. Creating an adapter uses one design from your allowance. No AI message is needed for this starting model.

Measure the connection, not its label

Vacuum hose and workshop fitting sizes are often nominal. Use calipers to measure the actual mating surface in several places. For an adapter that slips over a connection, enter its outside diameter. For one that slips inside, enter its inside diameter.

Choose a smooth, rigid section where possible. Corrugations, threads, flexible hose walls, and locking tabs may need a more specific design.

Print a fit test before the full adapter

Clearance is a starting allowance, not a guaranteed fit. Printer calibration, material, and surface finish affect the result. Check the model in your slicer and test a short section of each connection before printing the full part.

The adapter has straight cylindrical ends with a smooth transition. Review the transition for overhangs and supports in your slicer. Physical fit and airflow have not been validated for your equipment.

Customize it further in the studio

Your adapter opens as a private, editable OpenSCAD design with dimension controls. Preview it on your build plate, refine it, and export STL or 3MF for your slicer. You can also download the OpenSCAD source. AI refinements use your plan or connected provider.

New to designing your own prints?

Follow a measured example, understand fit clearance, and check your model before printing.

Read the guide to designing 3D prints without CAD →