A place for the things in your drawer

Custom drawer organizer generator

Turn your drawer measurements into a printable organizer. Choose an even grid of compartments, set the wall and base thickness, and leave room for a comfortable fit.

Size your organizer

Measure the narrowest inside width and depth, and the usable height below any rails or obstructions. All dimensions are in millimeters.

Clearance is applied to each side and once at the top. A 180 × 240 × 50 mm drawer with 1 mm clearance produces a 178 × 238 × 49 mm tray. All compartments have equal usable dimensions.

The preview needs no account. Creating an organizer uses one design from your allowance. No AI message is needed for this starting model.

Measure inside the drawer

Measure the space the tray will actually occupy. Check the width at the front and back, and account for sloping sides, screw heads, drawer runners, and anything hanging below the drawer above it.

Use the narrowest usable measurements. Width runs left to right; depth runs from front to back. The top and side clearance leave space around the printed tray, and the base rests on the drawer floor.

Check fit before a full print

A cardboard outline is a useful first check of the footprint. Then test your printer and material’s dimensional accuracy before committing to a large organizer. Clearance is an allowance, not a guarantee of fit.

Place the flat base on the build plate with the open compartments facing up. Review wall thickness, layer settings, and the complete slicer preview. Your material, printer, and drawer determine the final result.

Keep adjusting it in the studio

Your organizer opens as a private OpenSCAD design with editable dimensions, rows, and columns. Check it on your build plate, refine it, and export STL or 3MF for your slicer. Download the OpenSCAD source when you want to edit the code yourself. AI refinements use your plan or connected provider.

New to designing your own prints?

Follow a measured example, understand fit clearance, and check your model before printing.

Read the guide to designing 3D prints without CAD →