Back to marketplace
Tea Bag Organizer with Recessed Ratchet Pusher and Slotted Lid

Tea Bag Organizer with Recessed Ratchet Pusher and Slotted Lid

By Landon Ringeisen · Saved version 21

This customizable tea bag organizer features a long, covered tray with a movable follower and a thumb tab extending through the lid slot. The floor keeps joint features beneath its surface, with ratchet teeth recessed into two narrow channels rather than raised above the floor. The lid has no decorative windows, retaining only the handle slot and front access opening. The design comprises two tray sections, two lid sections, and a separate follower, with snap joints and alignment tabs at the section seams. Editable parameters include tray dimensions, wall and floor thickness, corner radius, front tilt, access openings, lid fit, joint clearances, follower geometry, and ratchet details. Assembly and individual-part views are selectable. Available formats: STL, 3MF, and OpenSCAD.

Copy this community design to your library to customize it and download your saved version.

Log in to copy

Saved parameters

Values from version 21. Units are shown where supplied by the creator. These are model inputs; check the exported geometry and fit in your slicer.

Parameters for saved version 21
Parameter Value
Overall tray width95.25
Overall tray length457.2
Tray height76.2
Wall thickness1.2
Floor thickness3.2
Corner radius6
Front wall tilt in degrees10
Finger scoop radius15
Joint overlap length10
Snap fit clearance0.25
Snap beam width1.4
Hook projection0.8
Hook lead-in length3
Alignment tab width4
Floor skin above joint sockets1.2
Separated part spacing24

The creator has not added print notes yet. Check dimensions, orientation, supports, and material settings before printing.

Make this design your own

  1. Copy to your library. Log in and use “Copy to my designs” to create a private, editable copy.
  2. Adjust and preview. Change exposed parameters, edit the OpenSCAD code, or ask AI for changes. Save a new version when ready.
  3. Export and check. Download STL or 3MF for your slicer, or editable OpenSCAD. Check dimensions, build volume, orientation, and print settings.