Back to marketplace
Twin-Fin Fighter-Style Glider With Swept Wings

Twin-Fin Fighter-Style Glider With Swept Wings

By Jonathon Ringeisen · Saved version 6

This customizable fighter-style glider features swept, tapered main wings, a raised cockpit canopy, a narrow forward fuselage, and twin vertical tail fins. The front end has no separate nose pod or ballast pocket. Its wing geometry combines a flat underside with an adjustable raised upper profile, while the horizontal tail includes a trailing-edge trim ramp. Edit the OpenSCAD parameters to change wingspan, wing position, root and tip chords, sweep, surface thickness, fuselage proportions, canopy height, tail geometry, and fin spacing. A recessed balance reference is adjustable as a percentage of mean aerodynamic chord; it is a geometric starting target, not a measured center of gravity. Available formats are STL, 3MF, and OpenSCAD.

Copy this community design to your library to customize it and download your saved version.

Log in to copy

Saved parameters

Values from version 6. Units are shown where supplied by the creator. These are model inputs; check the exported geometry and fit in your slicer.

Parameters for saved version 6
Parameter Value
Main wingspan180
Overall fuselage reference length170
Main wing leading-edge position42
Main wing root chord43
Main wing tip chord20
Wingtip rearward sweep32
Flying surface base thickness1.2
Wing upper-profile rise1.2
Fuselage beam width2.4
Fuselage beam height3.2
Front fuselage setback reference34
Horizontal tail span64
Horizontal tail root chord23
Vertical fin height24
Tail trailing-edge trim rise0.6
Tail trim ramp length7
Initial balance target as percentage of mean aerodynamic chord27
Center fuselage fairing width14
Cockpit canopy height above fuselage5
Twin fin center spacing18
Tailplane leading-edge sweep12

The creator has not added print notes yet. Check dimensions, orientation, supports, and material settings before printing.

Photos supplied by the creator. Each photo shows the saved version it was added for.

Twin-Fin Fighter-Style Glider With Swept Wings: creator print photo
Version 6 · Current saved version
Twin-Fin Fighter-Style Glider With Swept Wings: creator print photo
Version 6 · Current saved version
Twin-Fin Fighter-Style Glider With Swept Wings: creator print photo
Version 6 · Current saved version
Twin-Fin Fighter-Style Glider With Swept Wings: creator print photo
Version 6 · Current saved version

Make this design your own

  1. Copy to your library. Log in and use “Copy to my designs” to create a private, editable copy.
  2. Adjust and preview. Change exposed parameters, edit the OpenSCAD code, or ask AI for changes. Save a new version when ready.
  3. Export and check. Download STL or 3MF for your slicer, or editable OpenSCAD. Check dimensions, build volume, orientation, and print settings.