Back to marketplace
Three-Key MX Clicker with Deep Recessed Base

Three-Key MX Clicker with Deep Recessed Base

By Jonathon Ringeisen · Saved version 4

A customizable three-key desktop clicker with a rounded rectangular base, deep stepped key wells, and tapered Esc, F1, and F2 keycaps. The raised walls surround more of each keycap for a less exposed appearance. The design uses separately purchased MX-compatible clicky switches for its mechanism; switches are not modeled. Editable parameters control base dimensions, recess depth and width, key spacing, mounting openings and fitting allowance, keycap shape, cross-shaped stem sockets, and legend size and engraving depth. Set engraving depth to zero for blank caps. Component selection provides the full part layout, individual base or keycaps, and an assembled preview. Built-in vector legends require no external fonts. Available formats are STL, 3MF, and OpenSCAD.

Copy this community design to your library to customize it and download your saved version.

Log in to copy

Saved parameters

Values from version 4. Units are shown where supplied by the creator. These are model inputs; check the exported geometry and fit in your slicer.

Parameters for saved version 4
Parameter Value
Component selection0
Base length67
Base width28
Base overall height21
Minimum base wall thickness2
MX mounting lip thickness1.5
Base corner radius3
Outer upper edge bevel0.6
Closed bottom thickness1.6
Depth of visible square recesses7
Width of each visible square recess18.8
Corner radius of visible recesses0.8
Width of switch body and pin cavity below mounting lip17.4
Nominal square MX mounting opening14
Total mounting opening fitting allowance0.1
Center-to-center key spacing20.5
Keycap skirt width and length18
Keycap finger surface width and length14
Keycap height8
Keycap shell wall thickness1.4
Keycap top thickness before engraving1.6
Keycap corner radius2
Outside diameter of keycap stem boss6.4
Stem boss bottom height above skirt edge0.8
Overall length of each MX socket cross arm4.1
Width of each MX socket cross arm1.3
Depth of blind MX socket4.5
Unpressed skirt height above recessed switch mounting surface5
Engraved legend size3.8
Legend engraving depth; zero makes blank caps0.4
Separation between printed parts8

The creator has not added print notes yet. Check dimensions, orientation, supports, and material settings before printing.

Make this design your own

  1. Copy to your library. Log in and use “Copy to my designs” to create a private, editable copy.
  2. Adjust and preview. Change exposed parameters, edit the OpenSCAD code, or ask AI for changes. Save a new version when ready.
  3. Export and check. Download STL or 3MF for your slicer, or editable OpenSCAD. Check dimensions, build volume, orientation, and print settings.