Workshop Adapters and Holders

A workshop adapter begins with the surfaces it must connect. Measure the outside of a connection for a sleeve that fits over it, or the inside of an opening for an insert. Keep those measurements separate from nominal product labels.

Use a community design as a starting point, then inspect its parameters and saved-version notes before making changes. Keep a private copy and save your own iterations so a successful fit test can be traced back to its geometry.

The hose adapter generator offers a measured starting model with separate connection types, wall thickness, and diametral clearance. Print a short fit sample before making the full part, and review orientation and supports in your slicer.

Start with a measured generator →

Export your saved version as STL or 3MF for your slicer, or download the editable OpenSCAD code. Check the fit, orientation, and print settings before printing. See how Extrudely works.

Community designs

1 design
Recently updated
Parametric Male-to-Male Vacuum Hose Reducer with Fit-Test Rings

A hollow vacuum hose adapter with two male insertion ends, a tapered transition, and a continuous bore without internal steps. The default setup uses measured socket inside diameters of 32 mm and 35 mm, with 0.3 mm diametral clearance, giving male outside diameters of 31.7 mm and 34.7 mm. Each insertion section is 25 mm long, joined by a 20 mm transition with 2 mm walls and external lead-in chamfers. The OpenSCAD source lets you edit both socket diameters, clearance, insertion lengths, taper length, wall thickness, and chamfer size. Positive clearance makes each male end smaller than its mating socket. An optional mode generates two short fit-test rings with adjustable length and spacing. Available formats: OpenSCAD, STL, and 3MF.

Log in to copy