A description is the beginning of the model
In Extrudely, the AI writes OpenSCAD code from your description. That code defines shapes, dimensions, and how those shapes combine. A geometry compiler produces the model you inspect in the preview and export as STL or 3MF.
An STL contains a surface mesh. It does not retain the original prompt or the named relationships in an OpenSCAD program. Keep the editable source when you expect to revise a hole, move a divider, or make another size of the same part.
Start with dimensions you can check
For a first project, choose an open tray, a spacer, or a simple holder. Specify millimeters, outside dimensions, wall thickness, and the features that must fit another object. Ask for the important dimensions to be exposed as parameters.
A useful request is: “Create an open tray with outside dimensions of 120 × 80 × 25 mm, 2 mm walls, and a 2 mm base.” After the preview appears, check the open top, inside cavity, and outside size separately. Then make one revision at a time.
- State whether a measurement is inside, outside, or center-to-center.
- Name the features that should remain fixed during a revision.
- Inspect the model before asking for extra details.
- Save a version before changing the geometry again.
Exporting is not the same as preparing a print
Open the saved version’s export options and download STL or 3MF. Import that file into your slicer, choose your printer and material, and inspect the dimensions and layer preview. Check that walls, openings, orientation, and supports make sense for the intended print.
A generated model can compile successfully and still need design changes. For a mating part, print a small fit sample before making the full object. Write down the version and settings so a later change does not get confused with the part you tested.
When a measured generator is simpler
If the shape is already covered by a template, begin with a generator instead of an AI request. Extrudely’s hose adapter and drawer organizer generators use supplied dimensions to build an editable starting model. You can preview them without an account, then save one in your studio.
Use AI when you need a new shape or a revision beyond the available controls. Use the source editor when you want direct control over the model definition. The best starting point is the one that leaves you with dimensions and relationships you can inspect.
Try a part you can measure
Start with a simple shape, inspect the dimensions, and save a version before your next revision.