Compare what you are saving
STL describes a model’s surface using triangles. 3MF is a container format for 3D manufacturing data and can carry information beyond a simple surface mesh. What a particular 3MF file contains depends on the application that creates it.
| Format | Use it for |
|---|---|
| STL | A model mesh for a slicer or other compatible application |
| 3MF | A model or project container supported by the receiving application |
| OpenSCAD | The editable model definition and named parameters |
Source: 3MF Consortium specifications.
A 3MF model export is not your printer setup
Extrudely exports the saved model as STL or 3MF. You still select the printer, nozzle, material profile, orientation, supports, and other process settings in your slicer. Do not assume a newly exported model already contains a suitable printer profile.
A slicer can save a project as 3MF with its own additional settings. Keep that project when you want to return to the prepared build plate. Check what the receiving slicer imports if you move the project to a different application.
Source: Prusa: saving projects as 3MF.
Check scale and the selected version
After importing either format, compare the displayed outside dimensions with your intended measurements. For example, a tray designed as 178 × 238 × 49 mm should arrive at that size. Correct an unexpected scale before placing supports or preparing the build plate.
Export the saved version you intend to test, and give the file a name that identifies it. If you later change a diameter or wall thickness, keep the new mesh and slicer project separate from the earlier test. A familiar filename alone is not a reliable record of which geometry it contains.
Keep a useful set of files
For an editable project, retain the OpenSCAD source and its parameter values. For the print attempt, retain the exported model and the slicer project you actually prepared. For a fit test, record the outcome alongside the version and material.
Use STL when that is the simplest compatible exchange with your slicer. Try 3MF when your workflow supports it, while checking the imported contents. Use OpenSCAD when the next task is changing the model rather than slicing it.
Try a part you can measure
Start with a simple shape, inspect the dimensions, and save a version before your next revision.